Wood master Flex Fuel Owner's Manual download pdf (Page 62)

Flex Fuel Owner’s Manual 2012

Release Method

You may select 3 dierent types of releases for the buer. Likewise, the release type only has an aect in

 thefurnaceoperatingmodes"Pelletsautomatic",and"Bulkmaterials-automatic".

Always O

If you select always o, the buer is not charged to its required temperature. The buer is maintained

above 50 °F in the freeze protection mode (outside temperature is lower than auto freeze protection

temp. Refer to general heating cycle 1 settings).

Always On

The buer temperature is recharged if the buer temperature top has dropped below the set minimum

buer temperature top.

With Clock

The buer is only recharged within the set release periods, if its buer temperature top has dropped

below the set minimum buer temperature top.

Release Period 1 to 3

You can set 3 dierent release periods for the buer from 0:00 to 24:00 hours. If you do not require all

release period, set the starting and ending value to the same setting value in order to deactivate this

release period.

14: Buer/Thermal Storage

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 75 76

No comments

Wood master Flex Fuel Owner's Manual Page 62